Skip to main content

DIY Weathered Wood Jar Sconces

Yesterday as Mia (our pup) and I took a walk across our property, I glanced at the small stash of scrap wood I set aside for projects.  A few short hours later, these were casting a warm glow above our fireplace ...





Materials:

6 boards 30" long
4 boards 7" long
4 hooks (for hanging mason jars)
1" brad nails
1-1/2" wood screws
8 wood shims (as spacers)
2 D-ring hangers with screws
2 picture hangers with screws
4 jars
Wire
Jute string
Salt
Candles

Tools Used:

Ryobi Cordless Mitre Saw
Ryobi Cordless Drill
Ryobi Cordless Brad Nailer
Ryobi Cordless Screwdriver 

What can I say? .. We like Ryobi! 





The weather was gorgeous - sunny and slightly cool - a perfect day for an outdoor project.  



I began by cutting all the boards to length.  Thanks to the cordless mitre saw, this part of the process was quick and easy. 





I laid the boards out to determine spacing and our driveway made a great work surface.





The thickest ends of the wood shims served as spacers.






To help find the correct placement of the shorter 7" horizontal boards,  I placed jars along the sconces and found I liked them best with 11-1/2" spacing between the 7" horizontal boards.





Using the brad nailer, I tacked the 7" horizontal boards to the long vertical boards. This secured them, allowing me to flip the sconce over to install 1-1/2" screws thru the underside with the drill.


But before putting in any screws, I made pilot holes, to prevent the dry and weathered wood from splitting.






At this point I installed D-ring hangers on the back of each sconce.






 

Flipping the sconce back over to the front, I then attached a hook to the center of each horizontal board.






That completed the sconce assembly.

Now for the jars!


You don't really have to rush out to buy brand new canning jars (unless you want to).  Any clear jar from pasta sauce, pickles, salsa, etc. work just as well.  


Wire wrapped tightly around each jar ring formed a loop for hanging.

A length of thick jute string wrapped around the top of the jar and tied in a double knot adds a rustic touch.

Each jar contains a votive candle resting on a layer of regular table salt. Epsom salt, sand or pebbles can also be used if you like.







Battery operated votives or tea lights are a nice alternative to regular candles and the jars can also be used as vases.  Be sure to check out Pinterest for lots of cute variations.


With the sconces built, I enlisted my sweet hubby to hang them above the fireplace.  He used these picture hangers to ensure they stayed securely on the wall - they're a little more heavy duty than was actually necessary, but we already had them on hand:



Picture Hanger
Picture Hanger

 

Nothing beats the fun of brainstorming a project and having it completed all in one day - that doesn't happen all that often (at least in my world).  





Thanks to all the materials we already had on hand, the total cost for this project was only $6.84 for the 4 hooks.  Yay!








Your comments are greatly appreciated and I look forward to your thoughts and ideas!  I try to respond to comments via email as soon as I can. If your email address isn't available, I will comment here. Thanks so much for visiting!


Shared with:


Comments

  1. That is SUCH a cute project, Carolyn! You are so creative!

    ReplyDelete
  2. I'm in love with what you did here Carolyn. The rustic, weathered wood and jars are just the perfect combination and they looks amazing above the fireplace

    ReplyDelete
  3. These are so so pretty, I can't believe you just made them out of those pieces of wood! Thank you so much for sharing at Sweet Inspiration!

    ReplyDelete
  4. Carolyn.. wow!!!!!!!!!!! These are amazing.. What a wonderful idea.. Looks so pretty above your fireplace..
    You are one talented lady..

    ReplyDelete

Post a Comment

Popular posts from this blog

Frugal Craft Space - File Cabinet Makeover

After years of having our kitchen island serve as my craft table, I am excitedly creating a craft space in our guest room where craft supplies and equipment can remain set up and ready to go!  I envisioned a large craft table supported by two 2-drawer file cabinets.  The cabinets provide great storage, but were less than attractive and desperately needed a makeover.




The first criteria for the new craft space was to be frugal and to use items we already had on hand whenever possible - basically, the same criteria for any project we undertake. No surprise there!



 Supplies:

Two metal 2-drawer file cabinets
Four decorative drawer pulls
Zinsser 123 Primer
Latex Paint
12 large wood paint stir sticks
Paint brush
Mitre saw box or hand saw 
Loctite Power Grab adhesive
220 grit sandpaper
Wood filler


We already had one file cabinet and located another of the exact same height at a local thrift store for only $15.  Along with being thrifty, an added bonus is that older metal file cabinets are made really well…

DIY Console Table Reveal

Last weekend we took advantage of the gorgeous weather and turned our garage into a workshop as we measured, measured again, cut, assembled and sanded the boards that would result in this beauty ....







To say that we like it is an understatement!  

This journey began with the need to replace our drastically undersized original console table and you can read more about that HERE.



Our inspiration was Ana White's Rustic X Console.  We followed Ana's wonderful free plans to construct the frame using 2" x 2" and 2" x 4" boards.  These were the only boards we had to purchase, as we had the two shelf boards (1" x 12" each) and three tabletop boards (2" x 6" each) on hand.

The finished dimensions are a whopping 76-1/2" x 18" x 32" - a little over 6 feet, making it much more appropriately sized for our 18' long wall (our original console table was only 42".)

You'll notice a few additional foyer changes as well.  The wall was…

2016 Christmas Decor

It's starting to look and feel a lot like Christmas ... the presents are wrapped, the mantel is aglow, and our home is an explosion of glittery gold, bold red and deep green.




This year's mantel is decked out in three layers of garlands ... a base of vertically strung pinecones, and a lighted spruce garland, topped off with a gilded cascading garland.  Instructions for the DIY pinecone garland are HERE.



Above the mantel, a traditional spruce wreath with gold and red ball ornaments is surrounded by a gold open picture frame and a symmetrical arrangement of glittery cutout gold stars and red trees, red felt cone trees, and copper lanterns filled with gold wrapped candles.

A splash of red also warms the hearth area - this darling wood step stool painted with shiny red enamel was built by hubby's grandfather many years ago and is the perfect perch for the vintage red truck and tree.  Surprisingly, our gold painted Thanksgiving pumpkin appears to be alive and well to shine on throu…